 |
ARAGON™ GLASS SERIES WALL MOUNTED RANGE HOOD |
| . |
| The Sales Pitch |
| Home owners are looking to take their kitchen design to the next level and for a way to set their kitchen apart from everyone else's. You would be hard pressed to find a "high end" kitchen that did not have stainless steel appliances throughout. The Aragon™ provides the stainless steel finish to complement the rest of the appliances, then upgrades it with the addition of the glass canopy putting the finishing touch on the design. |
| . |
| The Aragon™ Glass Series is a great choice for an installation over a standard electric or gas range. It is particularly well suited for the homeowner wishing to update the kitchen, eliminate the dated OTR microwave and improve ventilation without replacing cabinets. The ease of installation makes this a perfect DIY project for the home handyman and greatly updates the appearance of the entire kitchen without costly cabinet replacement. In fact it makes a great upgrade that many times can be accomplished in less than a day. |
| . |
| The Technical Stuff You'll Be Asked |
| The Aragon™ is a wall mounted chimney hood available in a 36" width with a beautiful stainless steel finish and tempered glass canopy. The Aragon™ Series hood features a powerful 600 CFM permanently lubricated split capacitor motor that provides superior ventilation for many common household applications. |
| . |
| Two Halogen cook-top lights provide plenty of lighting. The push button speed control allows for 3 speed settings and an off position. Controls are located on the front center of the hood for easy access. An upgraded feature of this hood is an electronic blower delay timer that automatically shuts the hood off after 15 minutes when selected. |
| . |
| The Aragon™ is designed to perform best when vented to the outside. The hood is easily mounted to the wall with screws or anchors (appropriate to hold the weight). The 6” round duct required (venting material is not included) for venting is enclosed behind the telescoping chimney which sits atop the canopy and is attached to the wall with a mounting bracket. A damper located at the top of the canopy helps to keep outside air from the interior of the home. Chimney extension kits are available for ceilings over 8 ft. |
| . |
| For installations where venting is not possible the Aragon™ can be installed in a non-ducted configuration with the addition of two optional charcoal odor filters. These attach directly to the blower and the grease filters remain in place. Exhaust air is then channeled through the venting slots located on each side of the chimney and returned back into the room. The anodized aluminum grease filters will not discolor if cleaned in the dishwasher. |
| . |
| What do I do next? |
| Return to the main page to learn more about other Air King Products |
| . |
| Contact Air King for purchasing options or to be set up as a distributor |
| . |
| Visit the web page for more information including specifications and installation instructions |
